American Polywater Logo -- click to return to homepage white space
Web Site Search

Pulling Lubricants Blowing Lubricants Cable Cleaners Cable Pulling Software
Sealants Adhesives MRO Aerosols Free Training & Product Demonstration Videos Calculators
Home | About | Literature | Site Map | MSDS | Contact | Engineers | Shows | Links | Samples | RFQ | Catalog Numbers

Polywater®
FTTx Products		 Polywater® FTTx Products.
English Literature Version (in HTML) in PDF Español Français Chinese Português Image
   Polywater® FTTx Spray Lubricant Yes -- -- -- -- Polywater® FTTx Spray Lubricant.
   Type FO™ Alcohol Prep Wipe Yes -- -- Yes -- Type FO™ is great for cleaning glass fiber or connector end faces for better light transmission performance. Type FO™ quickly removes dust, oils, and contaminants, while leaving no residue. The anhydrous alcohol in FO™ has essentially no water content. Avoiding water is important with optic fiber cleaning.
   BonDuit® Conduit Adhesive Yes Yes -- Yes Yes BonDuit® Conduit Adhesive. A High Strength Sealant for Bonding Polyethylene, PVC, Fiberglass, Metals, and Composites.
   FST™ Foam Duct Sealant Yes Yes -- Yes Yes Polywater® Duct Sealant & Water Block Foam Kit -- Seals Contaminants Out of Conduits and Ducts. Protects Cables. Strong, Resilient, Chemically Resistant. Cures Quickly.
   Grime-Away™ Tool Cleaning Wipes Yes -- -- -- -- Grime-Away™ Multipurpose Cleaning Wipes -- Premoistened Heavy-Duty Towelettes that Moisturize and Soften Hands While Cleaning Tools and Surfaces.
   HydraSol® Cable Gel Remover Yes Yes Yes Yes Yes HydraSol® Remover -- Cleans cable filling gels, flooding compounds, PE/PJ & ETPR greases, fluxes, and ickypic off coax, category 5, fiber optics, communications wires, hands, and splicing tools.
   Polywater® J Lubricant Yes Yes Yes Yes Yes Polywater® J High Performance Cable Pulling Lubricant -- Specification Grade Lube For Fiber to the Home Cabling. Provides Excellent Friction Reduction for Installing all Wires in any Conduits, Ducts, and Raceways.
   Polywater® F Lubricant Yes Yes -- Yes Yes Polywater® Lubricant F is a high performance, pourable liquid lubricant recommended for long, difficult, lightguide cable pulls. It is slow drying and leaves a lubricating film after its waterbase has evaporated. Polywater® Lubricant F will not stress crack low density polyethylene. It is compatible with all types of cable jackets.
   Prelube 2000™ Blowing Lubricant Yes Yes -- Yes Yes Prelube 2000™ -- A Special Lubricant For Prelubricating Conduit Before Pulling, Pushing, Air Floating, or Blowing Cables. Reduces Tension During Installation in Raceways. Prevents Rope Burn-Thru. Outperforms and Costs Less Than Factory-Lubricated Ducts.
   Prelube 5000™ Microcable Blowing Lubricant Yes Yes -- -- -- Prelube 5000™ -- reduces frictional drag during the blowing of small diameter fiber optic microcable into microtube duct. It increases the length of cable that can be blown in a single shot. Prelube 5000™ is more concentrated, yet less viscous, than Prelube 2000™ (for blowing conventional fiber cables). The improved chemistry allows this product to spread further and reduce friction at extremely low coating levels. The lower viscosity allows practical application into the microtubes.
   SqueekyKleen™ Communications Cleaner Yes -- -- Yes -- SqueekyKleen™ -- cleans and fans fiber in two wipes without alcohol, saving time and money. Hear the difference! No follow-up with alcohol required to get fibers squeaky clean and separated when prepping for splicing. SqueekyKleen™ is less harsh on hands and reduces chemical odors and vapor concentrations to a minimum in splice trailers and vaults. SqueekyKleen's™ unique formulation and specially designed high-performance towelette work to remove pik from the entire surface of loose-tube or ribbon fibers, leaving no residue. SqueekyKleen™ helps keep splice equipment clean of contamination for better fiber alignment and splice quality. Safe on acrylate and Mylar®.

View flyer in PDF Format

Click here to Add Your Name To Our Mail List

ARRA Buy American Compliant
ARRA Buy American Compliant		 MadeInAmerica.com Listed
MadeInAmerica.com Listed		 FTC Made In America Qualified
FTC Made In America Qualified

Home | About | Site Map | Literature | Samples | Links | Reps | Videos | Pumps | RFQ
Codes | Engineering | Shows | Spotlight | Newsletters | MSDS | Translations | Contacts | Jobs

American Polywater Corporation -- The world's leading manufacturer of cable pulling lubricants, cable cleaners, and MRO & construction chemicals.
P.O. Box 53 | Stillwater, MN 55082 USA
1-(651) 430-2270 (Voice) | 1-(651) 430-3634 (Fax)
1-(800) 328-9384 (Toll-Free US/Canada Only)

Copyright © 2001 - 2010 American Polywater Corporation | Polywater Updated 7/28/107/28/10


mdu multiple multi dwelling unit broadband FTTp FTTn FTTh FTTc EPON GPON Greenfield Brownfield projects fiber to the home premise node neighborhood curb last mile local area networks microtechnology